Professional Trajectory

Professional experience Education Courses
2018
2028

Experience

4Space UniOvi
Drone Autonomous System Lead

2nd place internationally in the ERC drone task with 295/300 points, behind EPFL Xplore and tied with Brno Mars Rover: three autonomous flights, 8/9 sample tubes localized within 10 cm, and autonomous landing. I designed and implemented the onboard autonomy, real-time CNN perception and MAVLink mission software for 4Space UniOvi’s first competitive drone entry.

  • 2nd place internationally in the ERC drone task with 295/300 points, behind EPFL Xplore and tied with Brno Mars Rover.
  • Three consecutive autonomous flights over the drone Mars Yard.
  • 8/9 sample tubes detected and localized with ground-position accuracy below 10 cm.
  • Autonomous landing on the landing base prepared for the rover.
  • Second consecutive in-person final in Kraków; 124 registered teams from 29 countries and 25 teams listed in final scoring.
  • Designed and implemented the onboard autonomy, real-time CNN perception and MAVLink mission software for our first competitive UAV entry.
  • Trained and optimized the CNN for onboard Raspberry Pi 5 frame processing.
  • Used Optical Flow + LiDAR for GPS-free flight support.
  • Validated the autonomous mission flow in Gazebo + ArduPilot SITL before real flights.
4Space UniOvi
Head of Software Department
QHPC UniOvi
Assistant Researcher
  • Contributed to real-time respiratory monitoring for early disease detection.
  • Research on robust ML: domain adaptation with incomplete data and weak supervision with noisy labels.
  • Built the research group's website (QHPC).
University of Oviedo
R&D Intern — Autonomous Mobility Assistance System for People with Early Visual Impairment
  • Wearable assistive glasses for blind children.
  • Depth sensing up to 4 meters and sonification.
  • On-device object detection with Edge TPU.
  • Redesigned from Raspberry Pi Zero W to a lighter CM5-based version with 3D-printed sport glasses.
  • Field-tested in Mexico with 30 children; rapid adaptation.
  • Clinically observed case of enhanced residual vision supporting early neuroplasticity hypotheses.
  • Built the end-to-end C++ pipeline on Raspberry Pi Zero W for depth capture, filtering, resizing, and real-time multimodal feedback.
  • Implemented stereo sonification that maps horizontal position to left/right channels, height to frequency, and distance to volume.
  • Designed the I2C driver architecture for a 16×16 (256 motor) haptic array with PCA9685 controllers and sub-40 ms frame updates.
  • Integrated wearable hardware (ToF + USB cameras, speakers, Edge TPU, and 5-button control board) into the 3D-printed glasses with minimal frame modifications.
  • Delivered an offline instructor viewer (C++ HTTP server + lightweight web client) and performance tuning to keep feedback real-time.
CERN openlab
Computer Science Engineer
  • Selected among 30 worldwide from 2,000+ applicants.
  • Implemented and optimized Kahan summation using Nvidia GPUs with CUDA.
  • Good ROOT user acceptance.
University of Oviedo
Intern in the Department of Computer Science (Internship contract)
  • Computer software and hardware installation, maintenance and repair.
  • Incidents attention and personal treatment.
Royal Spanish Football Federation
Football Referee – 2ª RFFPA
  • Worked with two assistants to guide matches (22 players + staff).
  • Officiated 160+ matches.

Education

University of Oviedo
Informatics Engineering Degree – Computer Science specialization

Thesis grade10Proposed for Matrícula de Honor

  • Bilingual engineering studies.
  • Technical scholarship (OS deployments, hardware support).
  • Two years as a football referee.
  • Thesis graded 10 and proposed for honors (Matrícula de Honor).
  • Thesis stemmed from 18 months R&D on the Autonomous Mobility Assistance System for People with Early Visual Impairment.
Centre for European Master’s Programmes
M.Sc. in Artificial Intelligence Applied to Healthcare

Awarded extraordinary merit-based scholarship in admissions.

  • Awarded extraordinary merit-based scholarship in admissions.
Universidad Complutense de MadridUNED
M.Sc. in Systems and Control Engineering

Master’s training focused on connecting software, electronics, robotics, and AI through control engineering. The program covers how to model systems, design controllers, and deploy reliable autonomous behavior under real constraints.

  • Core focus on intelligent control, intelligent systems, autonomous robots, biosystems, computer vision, data mining, and system identification.
  • Open-loop control: useful when the system model is stable and predictable, allowing simpler actuation without continuous feedback.
  • Closed-loop control: key for real-world robotics because sensors continuously correct deviations, disturbances, and model errors.
  • Hands-on labs, internships, and final thesis (TFM) oriented to integrating control theory with deployable software and hardware.

Courses & Other Training

Minor in Modern Robotics

Advanced online training in modern robotics, including Reinforcement Learning, Imitation Learning, Vision-Language-Action (VLA) models, Diffusion Policies, Transformer-based robot learning, Isaac Lab/ManiSkill simulation, and deployment on real robotic manipulators.

  • Online minor started in April 2026 and currently in progress.
  • Focus on modern robot learning: Reinforcement Learning, imitation learning, Diffusion Policies, VLA models, and Transformer-based robotic control.
  • Training path includes Isaac Lab and ManiSkill simulation environments, plus deployment concepts for real robotic platforms.
  • Personal objective: apply the training to autonomous manipulation with a robotic arm.
Fusion 360 3D Design Course

One-month Fusion 360 course completed between May and June 2026, focused on practical 3D product design: sketches, parametric modeling, organic surfaces, technical drawings, assemblies, project presentation, and design-for-manufacturing decisions for real parts.

  • One-month course completed between May and June 2026.
  • Modeled mechanical, automotive, electronic-device, support, handle, and consumer-product parts.
  • Practiced sketches, constraints, parametric modeling, organic forms, technical drawings, assemblies, and project presentation.
  • Applied Fusion 360 as an integrated CAD/CAM/CAE workflow for moving from concept to manufacturable 3D parts.
University of OviedoFundación CTICCINN
Micro-credential in Introduction to Quantum Computing

The Micro-credential in Introduction to Quantum Computing offers training aimed at understanding the theoretical principles and fundamental applications of this emerging paradigm. The course covers qubits, superposition, entanglement, interference, quantum gates and circuits, reference algorithms like Grover and Shor, implications for cryptography and cybersecurity, combinatorial optimization, and Quantum Machine Learning. It also introduces quantum hardware technologies, including Rydberg-atom-based systems.

  • Taught by José Ranilla and Elías Combarro (QHPC group, University of Oviedo).
  • Covers qubits, superposition, entanglement, quantum gates, circuits, and algorithms.
  • Includes post-quantum cryptography, Quantum Machine Learning, and hardware technologies.
  • Inaugural lecture by Eduardo Sáenz de Cabezón.
  • Organized with CTIC and CINN participation.
University of Oviedo
Micro-credential in AI Applications in Computer Vision

Between October and December 2025, I completed the University of Oviedo micro-credential on AI applications in Computer Vision. The course covers the full end-to-end workflow: image formation and camera basics, dataset collection and labeling, preprocessing and augmentation, classical vision methods, deep learning foundations, object detection, evaluation, and deployment.

  • Final grade: 10/10.
  • Final project: YOLO-based safety vest detection.
  • Covered data collection, labeling, training, validation, and inference.
Introduction to Programming

Early introductory programming course completed between June and August 2018, focused on basic logic, control flow, and the foundations of writing first programs.

  • Built early familiarity with programming logic and problem decomposition.
  • Covered basic syntax, variables, conditionals, loops, and simple functions.
C++ Programming Course

C++ course completed between June and August 2019, used to move from general programming fundamentals into typed, compiled programming and more structured problem solving.

  • First structured contact with C++ syntax and compiled programming.
  • Reinforced logic, functions, data handling, and more disciplined debugging.
University of Oviedo
IoT from Pins to Pixels (ESP32)

40-hour ESP32 and IoT course completed in June 2024, covering Node-RED, embedded C++, GPIO, and Internet connectivity with HTTP and MQTT.

  • 40 hours of training from June 24 to June 28, 2024.
  • Covered IoT fundamentals, Node-RED, ESP32 programming, HTTP, and MQTT.
  • Focused on practical communication between embedded devices and web services.